SC1 SEALANT BY INNOVACAR QUICK NANOTECH CAR DETAILING SEALANT

SC1 Sealant by Innovacar is the solvent-based quick sealant for car detailing, to protect your car with a nanotechnological treatment. Thanks to the formation of a molecular barrier, it provides sophisticated technological protection that is long-lasting. Its main features are:

• Nanotechnological protective film: thanks to the most advanced nanotech and molecular technology, it can create an actual protective coating on the car bodywork and paint. It is a first protective barrier for small abrasions and from acid and alkaline products.
• Rainproof and beading effect: thanks to its formulation, it can create a water-repellent effect. It protects against limescale during the curing time, which is when the coating hardens.
• Silk effect: thanks to the barrier created, the surface of the car will be smooth to the touch.
• Rapid application: it has been designed to be a quick and easily applied sealant and to simplify the protective effect.
• Long lasting: the protective effect lasts up to 4 months if applied alone on the car after being cleaned properly with SP1 Prewash and S2 Foamy. The protection can last up to 8 months, if combined with W1 Quick Detailer used 20 minutes after the first application of SC1 Sealant and maintained over time with H20 Coat, every 3 washes.

Average consumption: 30 ml per vehicle.

Summary technical data:

• Beading: 5/5
• Self-cleaning capacity: 5/5
• Colour depth: 4/5
• Duration: 4/5
• Drying: In 1 hour
• Curing time: After 7 hours

• Use a sealant that is easy and quick to apply without sacrificing the protective effects.
• Create a protective film that facilitates cleaning, maintenance and protecting the bodywork from alkaline and acidic cleaning products.
• Preserve the polishing and protective effect of the coating over time.
• Have a constant and long-lasting water repellent effect.
• Enhance the colour of the paint by conveying brighter reflections and greater intensity and shine.
• Achieve a silky touch effect on your bodywork.
• Seal the car surface to protect it from the atmospheric agents.

How to apply the SC1 Sealant nanotechnology sealant:

1. Clean the car in prewash with SP1 Prewash, in the wash step with S2 Foamy and use the specific Innovacar products as support for the various contaminations:
   1. Use DS Scale for limescale.
   2. Use D3 Tar for tar and resin.
   3. Use D1 Iron for ferrous and metallic residue.
   4. Use D2 Check for wax residue and polish or abrasive paste fillers.
2. Make sure the car surface is dry.
3. Apply 2-3 sprays of SC1 Sealant on the low pile microfibre cloth; it can also be applied directly to the surface.
4. Apply panel by panel in a crisscross manner, i.e. proceed by applying the product horizontally from right to left all over the area and then start again vertically, from top to bottom, along the same area.
5. Go over the surface again with a medium/long fibred microfibre cloth with circular movements, turning it over often to remove any excess.
6. Wait up to 7 hours after the application for complete activation. The effect lasts up to 4 months.
7. 20 minutes after application you can use W1 Quick Detailer to finish the surface. Maintain it over time with H20 Coat every 3 washes to enhance the protective effect up to 8 months.

Use: use the product undiluted.

Precautions: do not apply in the sun and on hot parts. The best performance is obtained with a completely decontaminated and clean surface.

PRODUCT CODE

79416 - SC1 SEALANT 100 ml

79417 - SC1 SEALANT 500 ml

SAFETY INFORMATION

DANGER

H226 Flammable liquid and vapour.

H319 Causes serious eye irritation.

H336 Can cause drowsiness or dizziness.

H304 May be fatal if swallowed and enters airways.

H412 Harmful to aquatic organisms with long lasting effects.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read carefully and follow all instructions.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P271 Use only outdoors or in a well-ventilated area.

P301+P310 IF SWALLOWED: immediately call a POISON CENTRE.

P331 DO NOT induce vomiting.

P370+P378 In case of fire, use water to extinguish.

P403+P235 Store in a well-ventilated place. Keep cool.

P405 Store locked up.

P501 Dispose of contents/container in accordance with local regulations.

Contiene: ISOPROPYL ALCOHOL, ISODODECANE, Hydrocarbons, C10-C12, isoalkanes, < 2% aromatics,2-metilpropan-1-olo; isobutanolo

Contains among other ingredients: Greater than 5% but less than 15%: aliphatic hydrocarbons. Perfume.

Click here to download the data sheet