SC3 GLASS SEALANT BY INNOVACAR CAR GLASS COATING RAIN PROTECTION FOR CAR WINDOWS

SC3 Glass Sealant by Innovacar is the latest generation car glass coating rain protection with nanotechnology for car windows, which creates a barrier to liquids by means of a sealing system. To improve visibility even in the event of heavy rain and facilitate cleaning the car windows, Sc3 Glass Sealant is the most suitable product.

Here are its main distinct features:

• Hydrophobic and water repellent effect on windows: it can create an oil and water repellent coating that increases the sheeting and beading effects of the water.
• Resistant to wiper liquids: its composition is designed to make it resistant to alcohol and detergents found in wiper liquids and repeated car washes.
• It does not create friction with the wipers: the barrier created is at a molecular level and therefore, imperceptible and does not create jolts when the wipers are used – on the contrary, it protects the glass more from the mechanical action.
• Improves visibility in case of rain: thanks to its formula, even at low speeds, such as 50 km/h, it will be possible to notice the rain slipping off the windscreen while driving; furthermore, as the speed increases, the effect will be even greater, thereby improving visibility.

Average consumption: 30 ml per vehicle.

Summarised technical data:

• Self-cleaning capacity: 5/5
• Beading: 5/5
• Alcohol tolerance: 5/5
  
• Starting speed: 50 km/h
• Duration: 5/5
• Drying: In 20 minutes.
• Curing time: After 7 hours

• Improve visibility even in heavy rain.
• Create fantastic water repellent effects on your car windows.
• Protect windscreens from the mechanical action of windscreen wipers.
• Improve and simplify the cleaning of the glass after treatment.

How to make the car windows water repellent and protect them with SC3 Glass Sealant::

1. Clean and decontaminate the glass surface with DS Scale and a clay bar – a glass polish can be used if the decontamination is severe.
2. In the presence of wax residue, use D2 Check to remove it before the nanotechnology treatment.
3. Apply the product on dry glass.
4. Use the applicator and the Micron Suede cloth included in the package to apply the product in a crisscross manner, applying the product vertically from top to bottom all over the treated area and then start again horizontally from right to left, covering the entire area.
5. Wait 1 minute and wipe with a dry microfibre cloth to remove the excess product.
6. After about 20 minutes, the product can be reapplied to enhance its effect.
7. Wait up to 7 hours after the application for complete activation.

Use: use the product undiluted.

Precautions: do not apply in the sun or on hot surfaces. Best performance is obtained with a completely decontaminated and well-maintained surface. For proper product conservation, it is recommended to close the bottle with the cap provided and rinse sprayer and applicator with clean water before storage.

PRODUCT CODE

79296 - SC3 GLASS SEALANT 100 ml

SAFETY INFORMATION

DANGER

H226 Flammable liquid and vapour.

H319 Causes serious eye irritation.

H336 Can cause drowsiness or dizziness.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read carefully and follow all instructions.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P271 Use only outdoors or in a well-ventilated area.

P370+P378 In case of fire: use foam extinguishers.

P403+P235 Store in a well-ventilated place. Keep cool.

P405 Store locked up.

P501 Dispose of contents/container in accordance with local regulations.

Contains: ISOPROPYL ALCOHOL,BUTYL ACETATE,2-METHYLPROPANOL.

Contains among other ingredients: Equal to or greater than 5% but below 15%: aliphatic hydrocarbons. Perfume.

Click here to download the data sheet