S2 FOAMY BY INNOVACAR SNOW FOAM CAR SHAMPOO WITH ACTIVE FOAM

S2 Foamy by Innovacar is the ideal product for completely washing and cleaning your car and it is designed to offer an advanced solution for cleaning the bodywork of the car. In detail, this is a car shampoo with snow effect active foam with the following characteristics:

• Deep organic decontamination**: S2 Foamy, the first active foam shampoo for car detailing with deep cleansing** and additivated with enzymes, subject to patent protection*, is born. It is able to break down the most stubborn organic dirt quickly and easily, thanks to the prolonged enzymatic action on the same dirt substrate molecules.
• Snow foam effect: thanks to the effect of the foam with long-lasting adhesion to the bodywork, the product has more time to provide its action, and thanks to the lubrication, the amount of time required for mitts and brushes is minimised.
• Concentrated: a smaller amount of product is enough to achieve a considerable and effective cleaning power, even with deep cleaning**.
• Protective agents: it is able to prolong previously applied protective and nanotechnological films and prepare the car for the next protective treatment.
• PH neutral shampoo: Its neutral pH preserves the surfaces of the bodywork treated with coating and polishing processes and, thanks to its characteristics, it is able to easily eliminate road dirt and contaminations.
• Gentle on plastic materials and surfactants also of plant origin: the formulation is without the use of added sodium hydroxide, phosphorus, EDTA and NTA***. By also using surfactants of plant origin, "stress cracking" of plastics is greatly reduced by treating them gently, thus preserving them more over time.

Average consumption: 20 ml per vehicle.

Summary technical data:

• Cleaning action: 4/5
• Foam effect: 5/5
• With enzymes: YES
• Coating safety: : YES
• Surface safety: YES
• pH: 7.00

* Patent Application No. 14730984.3
** Compared to the version without enzymes
*** May contain traces.

• Washing the car with the two-bucket technique or with a foam gun.
• Cleaning the road dirt and contaminations from the bodywork of the car.
• Reducing the mechanical action on the car thanks to lubricated foam.
• Wash the car that has had a coating or a protection applied so that it does not ruin the effect.
• Washing cars that will be followed by a nanotechnological protection process, to avoid chemical interferences.
• Gently treating plastic and gaskets on your car.

To wash a car that has already gone through a pre-wash, we recommend using the two-bucket method. The main steps are:

1. Make sure to remove any bracelets or watches during this process to avoid accidentally scratching the bodywork.
2. Prepare two buckets with their grids on the bottom: these grids are set up to let debris and residues settle, keeping the water clear of any contaminations.
3. Prepare two high quality mitts.
4. Use the first bucket with the diluted product. We recommend first adding the product and then the water to mix the product better and already create a foam. For the maximum cleaning capacity, it is possible to use hot water between 35 and 40 degrees.
5. Mix to make the solution homogenous before use.
6. Fill the second bucket with water. This one will be for rinsing.
7. Use a clean mitt.
8. Dip the mitt in the bucket with the product and wipe the top of the car.
9. Dip the mitt in the rinse bucket and clean it to remove debris and impurities.
10. Take the second clean mitt and use it for on the lower part of the car.
11. It is recommended to use two separate mitts for the upper and lower parts to prevent the lower part, which is usually more covered with debris, from contaminating the upper part.
12. Proceed with rinsing with plenty of water, from the top down.

It is important to rinse the mitts frequently to prevent the dirt or debris from depositing and becoming sources of marks on the bodywork. Do not wash in a circular manner, this could create streaks.

If used with precompression pump or with the two-bucket method: the recommended dilution ranges from 1:25 to 1:50, i.e. use 40 ml to 20 ml of product and fill the remaining part with water (from 960 ml to 980 ml) to obtain 1 L of ready-for-use solution.

For frequent cleaning, the dilution can reach 1:500: therefore use 2 ml of product and add the remaining part of water (998 ml) to obtain 1 L of ready-for-use solution.

For cleaning with foam gun: the recommended dilution is 1:12; use 80 ml of product and add the remaining part of water (920 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:195.

For frequent cleaning, the dilution can reach between 1:25 and 1:50: therefore use between 40 ml and 20 ml of product and add the remaining part of water (from 960 ml to 980 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:390 to 1:765.

If used for pre-washing for weekly dirt: the recommended dilution ranges from pure to 1:20; use up to 50 ml of product and fill the remaining part with water (950 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:315.

Precautions: Do not allow the product to dry and do not apply it in the sun or on hot surfaces. The product can be applied to dry bodywork, but in the summer or in extremely hot areas, it is advisable to rinse the car to lower the temperature and avoid it from drying during application.

PRODUCT CODE

79282 - R:11 S2 FOAMY 100 ml

79283 - R:11 S2 FOAMY 1000 ml

79284 - R:12 S2 FOAMY 4.54 L

SAFETY INFORMATION

79282 - R:11 S2 FOAMY 100 ml

79283 - R:11 S2 FOAMY 1000 ml

DANGER

H315 Causes skin irritation.

H318 Causes serious eye damage.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read the label before use.

P264 Wash hands thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305+P351+P338 IN CASO DI CONTATTO CON GLI OCCHI: sciacquare accuratamente per parecchi minuti. Togliere le eventuali lenti a contatto se è agevole farlo. Continuare a sciacquare.

P310 Immediately contact the Poison Centre.

Contains: Capryl Glucoside; acetic acid, (2-butoxyethoxy); Ethanolamine; Sodium C14-16 Olefin Sulfonate.

Contains among other ingredients: Equal to or greater than 15% but less than 30%: Nonionic surfactants. Equal to or greater than 5% but less than 15%: Anionic surfactants. Less than 5%: Polycarboxylates. Enzymes, Fragrances, Preservatives (Benzisothiazolinone, Phenoxyethanol).

79284 - R:12 S2 FOAMY 4.54 L

DANGER

H315 Causes skin irritation.

H318 Causes serious eye damage.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read the label before use.

P264 Wash hands thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305+P351+P338 in case of contact with the eyes: rinse carefully with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P310 Immediately contact an ANTIVELENI CENTER/physician...

Contains: D-Glucopyranose, oligomers, decyl octyl glycosides; (2-butoxyethoxy)acetic acid; Trideceth-6; 2-aminoethanolamine.

Equal to or greater than 15% but less than 30%: Nonionic surfactants. Equal to or greater than 5% but less than 15%: Anionic surfactants. Enzymes, Fragrances (isoeugenol acetate, linalyl acetate, dimethylbenzyl carbinyl acetate, terpineol, galaxolide). Preservatives (phenoxyethanol, benzisothiazolinone, 2-bromo-2-nitropropropane-1,3-diol).

Click here to download the data sheet